10891 Roco MX645P22 ZIMO Sound decoder with 22-pin (PluX22)

The MX645P22 is one of the latest generation of ZIMO sound decoders for OO/HO and some O use. They have advanced capabilities, good continuous load rating and high power sound output. The MX645P22 is fitted with a PluX22, 22 pin plug.

General:

• 30 x 11 x 4mm.
• 14, 28 or 128 speed step (256 or 1024 internal steps).
• Ops and service mode programming.
• Built in capacitor support 1<2 seconds.
• Contacts for additional capacitor support.
• Drive on DC
• Software upgradeable (Requires MXDECUP module, MXULF or a ZIMO DCC System).
• Overload and overheat protected (but not totally immune to misuse).

Motor Drive:

• 1.2Amp continuous, 1.5 Amp peak.
• Silent motor drive at 20 or 40 kHz.
• Suitable for all DC motors including coreless.
• Individual speed curves.
• Automatic drive optimization but can be manually adjusted.

Functions:

• 10 function outputs including 2 for SUSI/Logic level.  Max total all functions 0.8 Amps.
• Full function mapping F0 to F12.
• Full lighting functions; dim, flash, mars, strobe etc..
• Train Control & Feedback
• Brake on DC.
• Lenz ABC (asymmetric brake control).
• Zimo braking modes.
• Constant braking distance.
• RailCom equipped.

Sound:

• Amplifier-  3 Watt.
• 16 Bit sound mixing.
• 32 Mbit sound storage.
• Speaker Impedence - 4 to 8 Ohms.

As standard this decoder is loaded with five generic steam and one diesel sound schemes; selectable by CV.